西朗门业拉链式快速门的控制系统中集成有诸多端口,像自动控制接口、外接设备接口等,其中外接设备端有开门、关门的信号接收/输出端,可以通过接入agv车辆的总控,来实现快速门与车辆的联动控制。
上图为控制箱接线与信号输入/输出说明
①开门信号申请:
agv车辆经过快速门前,发出开门信号申请,快速门通过fwd端口接收agv总控发出的开门信号,自动开门。
②开门到位信号:
快速门高速开启至zui上位置(上限位),同时会发出一个“开门到位”信号给agv总控,总控指挥车辆直行通过。
③关门信号申请:
agv车辆通过快速门后,向总控发出关门申请,快速门通过rev端口接收,自动关门。
④故障输出/输入
西朗快速门同时可以向agv车辆发出故障报警信号,根据情况判断是否要继续通过。
产品英文详情介绍
the control system xilang zippered door industry rapid integration of the door has many ports, such as automatic control interface, the external interface devices and the like, wherein the open end has an external device, the closing signal receiving / output terminal, the access by the total vehicle agv control, to achieve rapid control linkage of the vehicle door. the picture shows the control box wiring and signal input / output open signal 鈶application description: after a quick agv vehicle front door open signal emitted application, fast open gate receives signals emitted by the master control agv fwd port, automatic door. 鈶od signal: fast high speed door to open position (upper limit) on zui, will also issue an open place signal to the agv master control, master control command vehicles straight through. closing signal application 鈶 after the agv by flash vehicle door, close the application sent to the master control through the fast door rev receiving port, self-closing. 鈶fault output / input xilang speed door while a fault alarm signal to the agv vehicle, according to the judgment whether to continue.
菲瑞普智能设备(苏州)有限公司
17715395571
qq: 2922408929